Please help with universal harness

Factory amplifier replacement interface
Post Reply
Meraudi
New User
Posts: 4
Joined: Sat Jun 26, 2021 6:10 am

Please help with universal harness

Post by Meraudi »

Hello everyone,
i get the kenwood xr600 6dsp, but when open the box, i get (1) and (2) harness
i bought a Maestro AR, it on the way shipping to me. But i read that the AR just go with 4pin data cable.

So where can i get the (3) and (4) harness, to connect input and wake up the xr600.
Thank you.

Image

Meraudi
New User
Posts: 4
Joined: Sat Jun 26, 2021 6:10 am

Re: Please help with universal harness

Post by Meraudi »

Hello everyone,
i get the kenwood xr600 6dsp, but when open the box, i get (1) and (2) harness
i bought a Maestro AR, it on the way shipping to me. But i read that the AR just go with 4pin data cable.

So where can i get the (3) and (4) harness, to connect input and wake up the xr600.
Thank you.
Image
Image
Is that the white and orange is Front Left Input speaker. And the Grey and Red is Front Right Input ?

The (1) into (3)
Image
Image
Is the blue/white the Amp Turn On wire?
Thanks you......

Meraudi
New User
Posts: 4
Joined: Sat Jun 26, 2021 6:10 am

Re: Please help with universal harness

Post by Meraudi »

Image

Chris LaRoche
Moderator
Posts: 397
Joined: Mon Oct 07, 2019 12:49 pm

Re: Please help with universal harness

Post by Chris LaRoche »

The AR in universal mode includes all cables needed, other than the ones that come with the Kenwood, aside from their universal harness. So you should only have 3 pieces:

AR
XR-6006DSP
Kenwood universal harness (sold separately from the amp)
Chris LaRoche
Automotive Data Solutions
Technical Support - Maestro
MECP Master Installer

Meraudi
New User
Posts: 4
Joined: Sat Jun 26, 2021 6:10 am

Re: Please help with universal harness

Post by Meraudi »

Hello Chris, thanks for your reply.
DO you have the picture of universal harness: part (3) and (4) in my post?
If you have, please post here, i just want to see how it look with rca.
i dont have that universal harness, and i can not find it on kenwood store.
Tks you

Chris LaRoche
Moderator
Posts: 397
Joined: Mon Oct 07, 2019 12:49 pm

Re: Please help with universal harness

Post by Chris LaRoche »

I don't, since it's not a part we carry/distribute. This would be something to contact Kenwood for.

Thanks!
Chris LaRoche
Automotive Data Solutions
Technical Support - Maestro
MECP Master Installer

Post Reply

Return to “Maestro aR”