Page 1 of 1

Toyota CH-R Stuck at 97% on my RR2

Posted: Sun May 23, 2021 9:06 pm
by zapatosuno
Hi! i need some advise. I have an RR2 and I tried to update the firmware using the Weblinkmaestro apo on my Iphone 12 Pro. I get the error message "unsafe to update because: Vehicle is not parked."
By the way I have a brake bypass installed. Is that affecting the update process?

Re: Toyota CH-R Stuck at 97% on my RR2

Posted: Mon May 24, 2021 10:20 am
by Dara DeGrand
It's likely because we're not seeing the data for gear position on the data lines. However, our engineer should be able to update the firmware to fix the issue. He is out today because it's a Canadian holiday, but I have reported it and asked him to update it when he returns.

Re: Toyota CH-R Stuck at 97% on my RR2

Posted: Tue May 25, 2021 10:38 am
by Dara DeGrand
What year is your CH-R? Are you flashing TO2 or TO3? What is the serial number of the module? By all accounts, the engineer believes everything should work for flashing, so we're trying to do a little bit more digging to see if we can figure this out.