Toyota CH-R Stuck at 97% on my RR2

Find answers to common installation issues with the WebLink mobile.
Post Reply
zapatosuno
New User
Posts: 7
Joined: Sat Jan 23, 2021 4:44 pm

Toyota CH-R Stuck at 97% on my RR2

Post by zapatosuno »

Hi! i need some advise. I have an RR2 and I tried to update the firmware using the Weblinkmaestro apo on my Iphone 12 Pro. I get the error message "unsafe to update because: Vehicle is not parked."
By the way I have a brake bypass installed. Is that affecting the update process?

User avatar
Dara DeGrand
ADS Team
Posts: 7470
Joined: Mon Dec 02, 2013 1:34 pm

Re: Toyota CH-R Stuck at 97% on my RR2

Post by Dara DeGrand »

It's likely because we're not seeing the data for gear position on the data lines. However, our engineer should be able to update the firmware to fix the issue. He is out today because it's a Canadian holiday, but I have reported it and asked him to update it when he returns.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

User avatar
Dara DeGrand
ADS Team
Posts: 7470
Joined: Mon Dec 02, 2013 1:34 pm

Re: Toyota CH-R Stuck at 97% on my RR2

Post by Dara DeGrand »

What year is your CH-R? Are you flashing TO2 or TO3? What is the serial number of the module? By all accounts, the engineer believes everything should work for flashing, so we're trying to do a little bit more digging to see if we can figure this out.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Weblink Mobile”