2012 Jeep Wrangler

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
New User
Posts: 1
Joined: Sun Jun 13, 2021 9:18 pm

2012 Jeep Wrangler

Post by MCOLE »


I recently installed a rr2 module with my Kenwood dmx706s head unit and the illumination wire does not show power when lights are on. I have reflashed the device and can’t seem to figure out why this would not be working. Any ideas? Thanks

User avatar
Dara DeGrand
ADS Team
Posts: 7496
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2012 Jeep Wrangler

Post by Dara DeGrand »

If you meter our orange wire on the t-harness, is there any voltage on it when the lights are off, and when the lights are on?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”