Page 1 of 1

Kenwood DMX1057XR

Posted: Sat Jan 23, 2021 10:01 pm
by leets80
Struggling to get my radio to work. All I'm getting is a double red flash. I have reflashed my module 5 times now to make sure I've gotten the serial number correct. Everything is connected and I can't even get the radio to power up. I've confirmed power at the harness on the back of the radio. Not sure what I'm missing. Any help would be greatly appreciated.

Re: Kenwood DMX1057XR

Posted: Mon Jan 25, 2021 11:59 am
by JustinFerroni
Kenwood has a small cover that needs to be in place for the radio to power on. If you have 12v on red 12v on yellow and ground on the black at the radios harness and the radio does not power on its either cover needs to be installed or the radio is defective. I would contact Kenwood if the problem persists.

Re: Kenwood DMX1057XR

Posted: Thu Jun 10, 2021 1:05 am
by TLR8ight
I too am having problems with my kenwood dnr1007xr! The HU keeps rebooting constantly and then sometimes it will work for an hour or so but then it goes back to rebooting lol! I took the Kenwood HU out of my 2017 f150 and hooked it up directly to a battery without the maestro RR and it worked fine for hours but a soon as I put it back into the truck hooked up to the maestro rr it goes right back to rebooting. Any help would be appreciated!