Clarification please....2006 Honda Civic

Analog Steering Wheel Interface
Post Reply
wedmservices
New User
Posts: 3
Joined: Thu Sep 13, 2018 2:15 pm

Clarification please....2006 Honda Civic

Post by wedmservices » Thu Sep 13, 2018 2:23 pm

The install guide mentions a 22 pin connector "A" and a 12 pin connector "B". I haven't removed my factory Nav yet, but I have my Honda aftermarket 12 pin harness soldered to my Pioneer harness, and I'm not sure where the 22 pin connector is? Any help greatly appreciated.

User avatar
Dara DeGrand
ADS Team
Posts: 5215
Joined: Mon Dec 02, 2013 1:34 pm

Re: Clarification please....2006 Honda Civic

Post by Dara DeGrand » Thu Sep 13, 2018 3:50 pm

The 22 pin is your main radio plug.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

wedmservices
New User
Posts: 3
Joined: Thu Sep 13, 2018 2:15 pm

Re: Clarification please....2006 Honda Civic

Post by wedmservices » Thu Sep 13, 2018 4:29 pm

Ok thanks, Is that the plug going into my new Pioneer unit?

User avatar
Dara DeGrand
ADS Team
Posts: 5215
Joined: Mon Dec 02, 2013 1:34 pm

Re: Clarification please....2006 Honda Civic

Post by Dara DeGrand » Thu Sep 13, 2018 5:22 pm

No, the factory radio's main plug.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

wedmservices
New User
Posts: 3
Joined: Thu Sep 13, 2018 2:15 pm

Re: Clarification please....2006 Honda Civic

Post by wedmservices » Thu Sep 13, 2018 10:21 pm

So the 12 pin harness I'm using for the speaker harness is not used? The Maestro will tie in to a few wires on a separate interface plug that I will otherwise not be using? Can you suggest a way to tie in without cannibalizing that plug? Also, is there a pin out diagram that might show the locations? Thanks again.

User avatar
Dara DeGrand
ADS Team
Posts: 5215
Joined: Mon Dec 02, 2013 1:34 pm

Re: Clarification please....2006 Honda Civic

Post by Dara DeGrand » Fri Sep 14, 2018 9:05 am

The wiring diagram you get when you flash the maestro should give you all the info you need to do the install. It tells you where the plug is found, what pin you're connecting to, and what color that wire should be. If you have any further questions, I recommend calling our tech support line and we can talk you through the information shown in the guide to clarify it.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Maestro SW”