2013 mustang

Factory amplifier replacement interface
Post Reply
rb042hou
New User
Posts: 1
Joined: Sat Jul 28, 2018 3:37 pm

2013 mustang

Post by rb042hou » Sat Jul 28, 2018 3:47 pm

I have a pioneer avh2300nex, that I wish to install, I have the mus1, and the RR. If I want to use an aftermarket amp, (JL, and of course replace all the speakers) do I need a amp replacement module?? Or just how exactly do I connect aftermarket amp. Do I just use the regular connections and just use the RCA outputs on back of radio to aftermarket amp. What about door chimes, low fuel chime, Bluetooth, and phone calls. Do they still come across the speakers? I want to get it right. Thanks for reading.

User avatar
Dara DeGrand
ADS Team
Posts: 5210
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2013 mustang

Post by Dara DeGrand » Mon Jul 30, 2018 8:33 am

No, you don't need an amp replacement module. You would bypass your OEM amplifier, and wire up the new ones however you choose. There are so many different amplifiers and potential ways to configure it that I couldn't even begin to tell you how to do it. If you properly and completely bypass your OEM amplifier, all of the audio that's going through it now will continue to play.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Maestro aR”