2010 Subura Outback

Group using the SU1 and SU2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
RRB509
New User
Posts: 1
Joined: Thu Jul 26, 2018 5:45 pm

2010 Subura Outback

Post by RRB509 » Fri Jul 27, 2018 12:10 pm

Good day,
I just had a Kenwood DNX694S installed in my 2010 Outback with the standard 6 speaker configuration. The Maestro steering ADSMSW harness was used in the installation. Should I be able to get the car engine information and the OEM screen on the receiver? All I'm getting right now is the steering wheel buttons to work. Thank-you.

Rick

User avatar
Dara DeGrand
ADS Team
Posts: 5022
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2010 Subura Outback

Post by Dara DeGrand » Fri Jul 27, 2018 12:47 pm

The MSW is simply a steering wheel control piece; it does not support the other features you're asking about. That is the Maestro RR. If you go that route, you would also need the required vehicle specific t-harness.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Subaru”