Gauge Help w/Agh-2300nex

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
jdaniele32
New User
Posts: 3
Joined: Tue Jul 17, 2018 8:16 am

Gauge Help w/Agh-2300nex

Post by jdaniele32 » Tue Jul 17, 2018 8:26 am

I just had the avh-2300nex installed along with the maestro rr installed in my truck and I want to switch the position of the gauges so my MPH is the center instead of RPMs but cannot figure ho todo it, I tried clicking on it but it doesn’t give me the option to switch, was wondering if anyone can help

JustinFerroni
ADS Team
Posts: 214
Joined: Mon Jan 15, 2018 2:18 pm

Re: Gauge Help w/Agh-2300nex

Post by JustinFerroni » Tue Jul 17, 2018 8:43 am

Press and hold for about 3 seconds the gauge you want to change. This should bring you into the menu to change your gauges.
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

jdaniele32
New User
Posts: 3
Joined: Tue Jul 17, 2018 8:16 am

Re: Gauge Help w/Agh-2300nex

Post by jdaniele32 » Tue Jul 17, 2018 10:57 am

Yes I tried that but it won’t let me change it from RPM to MPH it 2 others I can choose but not MPH

JustinFerroni
ADS Team
Posts: 214
Joined: Mon Jan 15, 2018 2:18 pm

Re: Gauge Help w/Agh-2300nex

Post by JustinFerroni » Tue Jul 17, 2018 11:08 am

is MPH greyed out? is MPH set on another section of the gauges?
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

jdaniele32
New User
Posts: 3
Joined: Tue Jul 17, 2018 8:16 am

Re: Gauge Help w/Agh-2300nex

Post by jdaniele32 » Tue Jul 17, 2018 12:13 pm

It’s on the top left of the gauges I wanted to move it to the center gauge but when I click on the center gauge it doesn’t give me the option to switch it to MPH because it isn’t there

User avatar
Zack Flynn
ADS Team
Posts: 286
Joined: Mon Dec 12, 2011 9:46 am

Re: Gauge Help w/Agh-2300nex

Post by Zack Flynn » Tue Jul 17, 2018 8:04 pm

Try changing the gauge that is currently MPH to another gauge. Then make the center gauge MPH
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “Dodge, Chrysler, Jeep”