Replacing HK amp

Group using the SU1 and SU2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
jawrsh
New User
Posts: 11
Joined: Wed May 09, 2018 9:01 am

Replacing HK amp

Post by jawrsh » Fri Jul 13, 2018 10:59 pm

I installed an alpine ILX-207 in my 2016 Legacy with Harman Kardon. I used the RR and SU2 to retain the factory amp but now I'm interested in replacing it with an aftermarket amp. Do I need to re-flash the RR and remove the factory amp feature or leave it as-is?

JustinFerroni
ADS Team
Posts: 213
Joined: Mon Jan 15, 2018 2:18 pm

Re: Replacing HK amp

Post by JustinFerroni » Mon Jul 16, 2018 10:16 am

I personally would reflash the maestro when you pull the radio to run your RCA cables. In some firmwares certain things are disabled/enabled when flashing with/without factory amplifiers.
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

Post Reply

Return to “Subaru”