Tundras with JBL

8-Channel Interactive Signal Processor w/ Integrated iDatalink Maestro Module
Post Reply
skierwy
New User
Posts: 1
Joined: Thu Jun 28, 2018 4:55 pm

Tundras with JBL

Post by skierwy » Thu Jun 28, 2018 6:09 pm

Good afternoon all, I just purchased this unit for my 2014 Tundra with JBL and I have my hopes set really high that it is going to be the answer I am looking for. I am adding amps, speakers and a sub to my system and it was going to be a nightmare without this unit. I have not read much about Toyotas in online forums which may be a good thing. Is there anything I should be aware of besides updating the firmware prior to installation?

User avatar
billr
ADS Team
Posts: 121
Joined: Mon Feb 05, 2018 9:18 am

Re: Tundras with JBL

Post by billr » Fri Jun 29, 2018 9:06 am

As with any DSR1 when you get ready to install it, always update it on the Fosgate website then you to our site to flash the vehicle specific firmware. Toyota's are pretty solid vehicles to add the DSR1 so I feel that your install will go smoothly. If you get into a jam you can always post here or call our tech line.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

User avatar
-CHAD-
12Volt Specialist
Posts: 46
Joined: Thu Aug 16, 2012 12:57 pm
Location: Wisconsin

Re: Tundras with JBL

Post by -CHAD- » Tue Aug 07, 2018 12:09 pm

I did a 2018 Highlander with the JBL system and it worked great! Had a couple of issues with tuning through the app but other than that it sounds amazing! Great product!
Chad Erdenberger
Installer/Fabricator
Unique Edge Auto
832 Rose St.
La Crosse, WI 54603
608-784-6100

Post Reply

Return to “Maestro DSR1”