I need help with Park Assist

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
nicneo
New User
Posts: 3
Joined: Sat Jun 02, 2018 8:26 am

I need help with Park Assist

Post by nicneo » Sat Jun 02, 2018 9:25 am

I have a 2018 Toyota 4Runner, Installed the Alpine ILX-F309 with HRN-RR-TO2. according to the idata-link maestro firmware, park assist is supported by all hardware, however, I can't get it to show up. Could there be something I'm missing?

Thanks for your help.

User avatar
Dara DeGrand
ADS Team
Posts: 5009
Joined: Mon Dec 02, 2013 1:34 pm

Re: I need help with Park Assist

Post by Dara DeGrand » Mon Jun 04, 2018 8:52 am

If the parking assist is not on the data lines that run behind the radio, the maestro is unable to detect it and show the parking assist information. At that point, the parking assist is likely analog, independent of the radio, and just plays the parking chime through the gauge cluster.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

nicneo
New User
Posts: 3
Joined: Sat Jun 02, 2018 8:26 am

Re: I need help with Park Assist

Post by nicneo » Fri Jun 22, 2018 1:53 pm

Thank you for your response.

Post Reply

Return to “Toyota”