Maestro RR with MUS1 Dashkit pioneer DNX890HD OBD Gauge issue

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
amplifier1980
New User
Posts: 1
Joined: Fri May 25, 2018 5:37 pm

Maestro RR with MUS1 Dashkit pioneer DNX890HD OBD Gauge issue

Post by amplifier1980 » Fri May 25, 2018 5:52 pm

Hey @all. It came to my attention that OBD readings of AFR pid on the pioneer screen differs slightly from what is shown on the car's cluster display. For example car's AFR gauge (13 Mustang GT Premium) is showing 13.9 to 14.2 while the pioneer displays 14.7 to 15.. sorry for my bad english btw. Is there any possibility to get the pioneer gauge synced with the car's values? I guess the displayed AFR values come from OBD port. When I disconnect the pioneer from OBD and do some logging via laptop instead the AFR readings on it seem to be accurate.
Thanks a lot.
Fred

User avatar
Dara DeGrand
ADS Team
Posts: 4654
Joined: Mon Dec 02, 2013 1:34 pm

Re: Maestro RR with MUS1 Dashkit pioneer DNX890HD OBD Gauge issue

Post by Dara DeGrand » Mon May 28, 2018 8:53 am

If you can go into the setup of your radio, into the 'About gauges' menu and send us a picture of the code it shows, we might be able to see how the AFR is being calculated.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”