2013 Jeep Wrangler steering wheel or head unit but not both

Post Reply
fazzaro
New User
Posts: 2
Joined: Wed May 23, 2018 4:54 pm

2013 Jeep Wrangler steering wheel or head unit but not both

Post by fazzaro » Wed May 23, 2018 5:03 pm

I just installed a Pioneer MVH 2300 NEX on the latest firmware. If I only use the steering wheel buttons to control the head unit everything is fine. Once I reach over and adjust the volume manually on the head unit and then go back and try using the steering wheel control they do not respond. The only way to get them back is by turning off the Jeep and restarting it again. Any ideas?

User avatar
Dara DeGrand
ADS Team
Posts: 4819
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2013 Jeep Wrangler steering wheel or head unit but not both

Post by Dara DeGrand » Wed May 23, 2018 5:05 pm

It sounds like you have something plugged into the W/R input on the back of the radio. If there is anything plugged in there, the steering wheel controls will act up.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

fazzaro
New User
Posts: 2
Joined: Wed May 23, 2018 4:54 pm

Re: 2013 Jeep Wrangler steering wheel or head unit but not both

Post by fazzaro » Wed May 23, 2018 10:49 pm

Dara you're a genius! My son plugged it into the W/R input just like you called it. Everything is perfect now!

Thank you,

Frank

Post Reply

Return to “CH1 radio replacement solution”