Clock display stuck in AM

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
kspee
New User
Posts: 5
Joined: Fri Feb 23, 2018 4:23 pm

Clock display stuck in AM

Post by kspee » Thu May 10, 2018 1:51 pm

I installed an Alpine iLX-107 head unit into my 2013 Mustang using the Maestro RR and MUS1 dash kit. Everything seems to be working as expected but one thing that annoys me is that the clock display on the factory display screen is constantly showing the time in AM unless it's on 12:xx. The clock on the Alpine head unit and factory display sync up but I just can't get the display to show PM unless the Alpine is set to a 24-hour clock. Is there something that can be done about this? Not sure if this is a Maestro RR issue or an Alpine issue or possibly human error.

User avatar
Dara DeGrand
ADS Team
Posts: 4540
Joined: Mon Dec 02, 2013 1:34 pm

Re: Clock display stuck in AM

Post by Dara DeGrand » Fri May 11, 2018 11:17 am

The radio's clock is responsible for sending the time information to the external display. I would check to see if there are any radio firmware updates available that might resolve this.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”