We flashed by firmware via the idatalink site for the module twice and have the black 4 pin connector by the USB on the ADS-MRR connected to the back of the idatalink port on the Kenwood unit. We get the dual flashing red LED and have even tried the red 4 pin connectors. We tried with all the other cables connected to the module at the same time and no luck.
Any other thoughts or miswiring?
Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
2 posts • Page 1 of 1
- New User
- Posts: 1
- Joined: Wed May 09, 2018 12:42 am
- Dara DeGrand
- ADS Team
- Posts: 4548
- Joined: Mon Dec 02, 2013 1:34 pm
Check the radio serial number menu in the radio and see if it matches the label on the outside of the radio. If it doesn't match, or if you entered the wrong model or serial number during the RR flashing process, that would cause this problem too.
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC