Rx-8 maestro rr with pioneer avh2330nex

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
New User
Posts: 1
Joined: Sun May 06, 2018 9:10 pm

Rx-8 maestro rr with pioneer avh2330nex

Post by Mxrider4life847 » Sun May 06, 2018 11:02 pm

2005 Mazda RX-8
PIONEER AVH2330Nex headunit
Meastro rr

Couple of issues following my installation a few months back.

The first is that I never did have steering wheel controls. I wired it up as per the diagram I received... it’s not a big issue as I had an axxess module that was ready to install. After confirming proper wiring, I went ahead and installed the axxess aswc, all radio controls are now functional. But I was thinking the maestro rr should offer this function?

Secondly, i have proper gauge readings from my OBD2 displayed on the head unit, however the vehicle information tab is greyed out and does not give me access to display the tire pressure information or CEL info.

Any thoughts?

Thank you

User avatar
Dara DeGrand
ADS Team
Posts: 4562
Joined: Mon Dec 02, 2013 1:34 pm

Re: Rx-8 maestro rr with pioneer avh2330nex

Post by Dara DeGrand » Mon May 07, 2018 8:41 am

Yes, we do retain steering wheel controls with the RR. If you wanted, you could remove the other module and wire our steering wheel inputs up, so that it's all going through one module.

The CEL information is in the OEM Setup menu, under the gauges settings.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”