2012 Nissan 370Z Bluetooth Connector

Steering Wheel & Radio Replacement Combo
Post Reply
Canmark
New User
Posts: 2
Joined: Thu May 03, 2018 4:40 pm

2012 Nissan 370Z Bluetooth Connector

Post by Canmark » Thu May 03, 2018 5:33 pm

I am looking at your instructions for jumpering the bluetooth connector
In Step 3 it shows jumpering 12 to 17, 13 to 18 and 14 to 19
I asume this is done on connector B237 on the Tel adapter Unit
These 6 wires connect to the harness that goes to the sterring wheel controls

The problem is that the Nissan wiring schematic shows wires 12 and 17 are common with wire 6 in Step 2
wires 13 and 18 are common with wire 16 in Step 2
wires 14 and 19 are common with wire 15 in Step 2

Jumpering these wires would not do anything
My car is a 2012 Nissan 370Z with Bose / no nav
Please confirm if this is correct or if I am looking at it wrong then advise on proper connections

User avatar
Dara DeGrand
ADS Team
Posts: 4819
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2012 Nissan 370Z Bluetooth Connector

Post by Dara DeGrand » Fri May 04, 2018 8:38 am

See attached; i put red squares around the wires you should be connecting. Connect input A to output a, B to B, etc.
370z.jpg
You do not have the required permissions to view the files attached to this post.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Canmark
New User
Posts: 2
Joined: Thu May 03, 2018 4:40 pm

Re: 2012 Nissan 370Z Bluetooth Connector

Post by Canmark » Fri May 04, 2018 10:49 am

Thanks for the prompt reply. My schematic had the North American and Mexican connections on the schematic.
After removing the Mexican connections it clears up everything

Thanks

Post Reply

Return to “Maestro RR”