Removing 'Defrost' button on MUS1 dash kit

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
kspee
New User
Posts: 5
Joined: Fri Feb 23, 2018 4:23 pm

Removing 'Defrost' button on MUS1 dash kit

Post by kspee » Wed May 02, 2018 9:09 am

Is it possible to remove the 'Defrost' button that comes pre-installed on the MUS1 dash kit for Mustangs? I know you can flash the ADS-RR module so that it does different actions but I'd like to have the button reflect the action as well. I've had my car for over 2 years now and have never used the defrost once.

User avatar
Dara DeGrand
ADS Team
Posts: 4724
Joined: Mon Dec 02, 2013 1:34 pm

Re: Removing 'Defrost' button on MUS1 dash kit

Post by Dara DeGrand » Wed May 02, 2018 9:11 am

The defrost can't be removed. It's not the same shape as the other buttons on the kit, so the buttons on the ends cannot be changed.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

pingvvino
New User
Posts: 1
Joined: Mon May 21, 2018 8:14 am

Re: Removing 'Defrost' button on MUS1 dash kit

Post by pingvvino » Mon May 21, 2018 8:33 am

It would be nice to remove.
I'm leaving in Dubai ... Defrost is useless there :)

User avatar
Dara DeGrand
ADS Team
Posts: 4724
Joined: Mon Dec 02, 2013 1:34 pm

Re: Removing 'Defrost' button on MUS1 dash kit

Post by Dara DeGrand » Mon May 21, 2018 9:42 am

It is physically a different shape than the other buttons that pop into the center of the kit, so it cannot be removed. Just leave the defrost button there and re-program it in the weblink updater. You can choose a single press, and a press and hold command for that button.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”