08 Scion TC/ Rr / T01 / Kenwood 6704s / Door Alerts & Fuel Level

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
Dkkdakota
New User
Posts: 1
Joined: Tue May 01, 2018 11:25 am

08 Scion TC/ Rr / T01 / Kenwood 6704s / Door Alerts & Fuel Level

Post by Dkkdakota » Wed May 02, 2018 2:28 am

Hello everyone, I have TPS readings and no door alearts. Also, fuel gauges work except the fuel tank capacity percent and miles till empty. I had this installed professionally.

User avatar
Dara DeGrand
ADS Team
Posts: 5203
Joined: Mon Dec 02, 2013 1:34 pm

Re: 08 Scion TC/ Rr / T01 / Kenwood 6704s / Door Alerts & Fuel Level

Post by Dara DeGrand » Wed May 02, 2018 2:18 pm

It's likely that the door status information doesn't ever enter on to the data lines in this vehicle. If it's not on the data lines, we aren't going to be able to display data that we don't have. This is common on Toyota/Scion vehicles.

As for the fuel gauges, if there is an x next to the gauge, the information is not on the data lines where we're reading, so we wouldn't be able to populate that information either.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Toyota”