2011 Tacoma and 1440NEX

Post Reply
jlo86cj
New User
Posts: 1
Joined: Wed May 02, 2018 12:32 am

2011 Tacoma and 1440NEX

Post by jlo86cj » Wed May 02, 2018 12:44 am

I just finished installing a Pioneer 1440NEX, RR and T01 harness in my 2011 Tacoma. I noticed the specific wiring diagram didn't show the data cable from the RR to the Maestro plug on the 1440 and it wouldn't work without it. It also didn't show where the steering wheel plug went, or the blue/yellow wire that's with it. I plugged the plug into the w/r on the 1440 and didn't hook the blue/yellow wire to anything. Everything seems to be working. I just wanted to make sure what I did was correct. Thank you, Jimmy

User avatar
Dara DeGrand
ADS Team
Posts: 5203
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2011 Tacoma and 1440NEX

Post by Dara DeGrand » Wed May 02, 2018 9:09 am

It sounds like you might be looking at the wrong install guide.

The blue plug should not be used in this install type.

See the correct guide below:
http://images.idatalink.com/corporate/C ... 180426.pdf
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “TO1 radio replacement solution”