2011 kia Sorento base wiring help

Analog Steering Wheel Interface
Post Reply
bobditts
New User
Posts: 1
Joined: Thu Apr 26, 2018 9:15 pm

2011 kia Sorento base wiring help

Post by bobditts » Thu Apr 26, 2018 9:27 pm

According to the image below, I am to connect the purple/red wire from the Maestro SW to pin A16 (blue) wire at the radio harness. Also to connect the black/white wire from the Maestro SW to pin A17 (Gray) wire at the radio harness.

The picture shows the radio harness (Kenwood DDX395) as having 3 rows of wires. This is not the case. It should only have 2 rows or wires. Can anyone tell me what the wires at the radio harness should be labeled as (ex. remote turn on, SW input, illumination, etc...)? Thanks!


Image

User avatar
Dara DeGrand
ADS Team
Posts: 5022
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2011 kia Sorento base wiring help

Post by Dara DeGrand » Fri Apr 27, 2018 9:30 am

The picture is your OEM harness, NOT the kenwood harness. You must wire the SW to the factory wires; the plug shown is the connector that plugged into your factory radio.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Maestro SW”