2017 Chrysler 200 LX

Post Reply
pasoundworks
12Volt Specialist
Posts: 24
Joined: Wed Sep 02, 2009 7:00 pm
Contact:

2017 Chrysler 200 LX

Post by pasoundworks » Sat Apr 07, 2018 7:42 pm

Just installed a Kenwood double din with RR and CH3. the odometer is flashing now. everything works but just that hiccup. Plug factory radio back in and stops flashing. any ideas?
Chris West
Sales Manager/Install Manager
P.A Soundworks Inc.
3300 2nd Ave. W.
Prince Albert, SK
(306)922-0606

User avatar
Dara DeGrand
ADS Team
Posts: 5128
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2017 Chrysler 200 LX

Post by Dara DeGrand » Mon Apr 09, 2018 9:13 am

Hook up the OBD2; I know we don't mention it in the guide, but if we're not seeing HS can, the odometer will flash. This should take care of it. If not, make sure you reset the RR and let the vehicle sleep. When it wakes up, it should try to re-initialize and they should communicate then.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

pasoundworks
12Volt Specialist
Posts: 24
Joined: Wed Sep 02, 2009 7:00 pm
Contact:

Re: 2017 Chrysler 200 LX

Post by pasoundworks » Tue Apr 17, 2018 3:39 pm

The car also has 2 usb's and one aux. will they be retained with the K200 kit?
Chris West
Sales Manager/Install Manager
P.A Soundworks Inc.
3300 2nd Ave. W.
Prince Albert, SK
(306)922-0606

User avatar
Dara DeGrand
ADS Team
Posts: 5128
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2017 Chrysler 200 LX

Post by Dara DeGrand » Tue Apr 17, 2018 5:23 pm

The kit comes with an adapter for the USB. Are you sure both USBs are in the console? If so, that's a USB hub (something we have never seen before in the Chrysler 200) and cannot be retained. If it's a single USB in the console, we can keep that using the supplied adapter.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “CH3 radio replacement solution”