2016 Jeep Wrangler no Uconnect

Post Reply
jacksonlakerat
New User
Posts: 1
Joined: Wed Oct 04, 2017 8:46 am

2016 Jeep Wrangler no Uconnect

Post by jacksonlakerat » Wed Oct 04, 2017 8:58 am

Hi! I've installed a Pioneer AVH1330 in my Wrangler and all works, including the amp, but when my ohone rings, the screen shows the incoming call but I can't hear them and they can't hear me. Also, the Unconnect voice is not heard when you hit the voice button on the steering wheel. And ideas?

User avatar
Dara DeGrand
ADS Team
Posts: 6130
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2016 Jeep Wrangler no Uconnect

Post by Dara DeGrand » Wed Oct 04, 2017 9:09 am

The most common things that could cause that are:

-Make sure that your blue/white amp turn-on wire is connected from the CH1 to the radio.
-Make sure that the all black, 3-pin to 3.5mm audio cable is plugged into AUX.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

longjorge
New User
Posts: 3
Joined: Tue Apr 03, 2018 9:44 pm

Re: 2016 Jeep Wrangler no Uconnect

Post by longjorge » Mon Apr 09, 2018 5:15 pm

I have this same issue. But i have found that the Pioneer headunit shows the call (in or out) but as soon as it connects it switches to private mode. Thus i cant hear anything unless i hold my phone to my ear. Is there a way to keep this from defaulting to private?

Post Reply

Return to “CH1 radio replacement solution”