Alpine i207-WRA

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
dancemf
New User
Posts: 1
Joined: Tue May 08, 2018 11:14 pm

Alpine i207-WRA

Post by dancemf » Tue May 08, 2018 11:19 pm

Im having this issue with my system where every few startups the system will take up to 2 full min to startup. Othertimes its starts right up. I ran alpines update on the radio and that went smoothly but its still doing the delay every few startups.

Any HELP would be greatly appreciated. I should note there is 2 other people on the wrangler foum having the same issue.

User avatar
Dara DeGrand
ADS Team
Posts: 4724
Joined: Mon Dec 02, 2013 1:34 pm

Re: Alpine i207-WRA

Post by Dara DeGrand » Wed May 09, 2018 8:53 am

If you check with a multi-meter, does the heavy gauge red wire on the maestro RR send 12v as soon as you turn the key on, even when the radio takes awhile to turn on? If so, the maestro is doing its job and it's a radio issue.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”