2015 Subaru BRZ and AVIC-8200NEX

Steering Wheel & Radio Replacement Combo
Post Reply
J.Dauby
New User
Posts: 2
Joined: Sat Sep 02, 2017 10:40 am

2015 Subaru BRZ and AVIC-8200NEX

Post by J.Dauby » Sat Sep 02, 2017 10:47 am

Hello,

I own a 2015 Subaru BRZ and a AVIC-8200NEX. My main goal with the RR was gauges. I have the correct wiring harness but the AVIC-8200NEX does not show up when trying to flash when I select a 2015 BRZ. However if I select a 2017 BRZ the 8200 shows up. If I flash for a 2017 BRZ the Maestro does not provide power to the head unit.
I attempted to bypass the RR, only running power and OBD to the RR. Flashed it for the 2017 BRZ and when connected to the AVIC-8200NEX it will show gauges for 5 seconds then disconnect requiring me to remove the power and restart. The outstanding issue is that I can not interface the RR with a 2015 BRZ and flash the module for a AVIC-8200NEX. When flashing the module for a 2015 BRZ the unit functions normally just without gauges.

-The AVIC-8200NEX needs to be added to the 2015 BRZ when flashing a RR module

User avatar
Dara DeGrand
ADS Team
Posts: 4818
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2015 Subaru BRZ and AVIC-8200NEX

Post by Dara DeGrand » Tue Sep 05, 2017 9:13 am

What RR do you have- a RR256, or a RR512? In order for that radio to show up, you need a RR512. There is not enough space on the RR256 to store the whole firmware, so it won't show up when you're flashing.
You do not have the required permissions to view the files attached to this post.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Maestro RR”