2015 Mustang 8" nav with shaker

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
User avatar
rmundell
New User
Posts: 1
Joined: Tue Jan 10, 2012 6:19 pm

2015 Mustang 8" nav with shaker

Post by rmundell »

Customer wishes to use an RR piece to add on screen info into his Pioneer DMX-c5500nex, already installed with a metra dash kit and interface.
Could not find hardwiring information, instructions just say use the kit and t-harness. Can you no longer just hardwire these, or am i looking in the wrong place?

Thanks, Robert.
Robert Mundell

Owner
Streetfighter Motorsports
2728 E. Bell Road
Phoenix, AZ 85032
602-493-2190
rmundell@streetfightermotorsports.com

User avatar
Dara DeGrand
ADS Team
Posts: 6777
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2015 Mustang 8" nav with shaker

Post by Dara DeGrand »

Hardwiring was only an option before we started making t-harnesses (about 7 years ago). Since then, when we add vehicle info and retain other features for you, the harness is required. Also, you will need more plugs than what is supplied in the box with the RR. Long story short, the MFT1 is required in this case.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”