2012 Tundra WITHOUT JBL with Kenwood DDX8906S and Maestro RR and T01

Post Reply
dcabinatan
New User
Posts: 3
Joined: Wed Jun 24, 2020 6:17 pm

2012 Tundra WITHOUT JBL with Kenwood DDX8906S and Maestro RR and T01

Post by dcabinatan »

Trying to get the wiring laid out and would like to know what the 2 RCA cables are for and what they should be plugged into. The diagram says they are "AUX IN". Would also like to know what the 3.5mm Mini Jack labeled "AUX" is for. It's in the same wire bundle as the speaker wires.

User avatar
Dara DeGrand
ADS Team
Posts: 6777
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2012 Tundra WITHOUT JBL with Kenwood DDX8906S and Maestro RR and T01

Post by Dara DeGrand »

You should only have one set of cables that says AUX IN. That is for the OEM aux port. It simply plugs into aux in on the radio.

As for the RCAs, are there white, white/black, and gray, gray/black pairs of wires attached to them? If so, cut them off and wire them up to the speaker wires on the kenwood.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

dcabinatan
New User
Posts: 3
Joined: Wed Jun 24, 2020 6:17 pm

Re: 2012 Tundra WITHOUT JBL with Kenwood DDX8906S and Maestro RR and T01

Post by dcabinatan »

Thanks.

Post Reply

Return to “TO1 radio replacement solution”