Steering Wheel Controls Inop after Battery Disconnected

Steering Wheel & Radio Replacement Combo
Post Reply
jv770816
New User
Posts: 1
Joined: Mon May 11, 2020 9:36 am

Steering Wheel Controls Inop after Battery Disconnected

Post by jv770816 »

I replaced the factory radio with a pioneer AVH1550-NEX and installed the i datalink maestro rr. Prior to the steering wheel swap everything including the audio controls on the steering wheel worked flawlessly. The audio controls quit working after having the battery disconnected for about an hour to allow for the steering wheel swap. The wheel I replaced it with is actually an XLT 302A wheel (disappointed I was misled but I should have also asked for the part number to verify prior to purchase). I swapped out the audio controls from my old steering wheel to this one and the wiring harness and still nothing. I even flashed the datalink rr and same result. The cruise controls and buttons on the left work and so does the horn. There’s no airbag light. So I’m just baffled and left scratching my head on this one. Anybody else experience this? Again, thank you in advance.

User avatar
Dara DeGrand
ADS Team
Posts: 6621
Joined: Mon Dec 02, 2013 1:34 pm

Re: Steering Wheel Controls Inop after Battery Disconnected

Post by Dara DeGrand »

What vehicle is this in?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Maestro RR/RR2”