Honda 2012

Group using the HO1 and HO2 firmware * see specific firmware for full feature list.
Post Reply
Kalkin
New User
Posts: 1
Joined: Fri Jan 10, 2020 2:05 pm

Honda 2012

Post by Kalkin »

Honda CR-V With AMP Not Retaining OEM Bluetooth 2012-2016

Hi,
Just need to know the exact way to connect the Bluetooth Orange/Blue wire. Instructions seems to indicate that the wire should be spliced to SWI 2. I just did, but the wheel buttons don't exactly work. There's a constant activation of the voice command in the Aftermarket radio and then it hangs.

Doc states "UNPLUG BLUETOOTH MODULE" but I don't understand what it means. Do I have to cut the bluetooth wire? What's the right scheme?

Image

Thanks a lot.

Fabian

User avatar
Zack Flynn
ADS Team
Posts: 828
Joined: Mon Dec 12, 2011 9:46 am

Re: Honda 2012

Post by Zack Flynn »

"B" would be correct, as would leaving the entire connector unplugged from the Bluetooth module itself after simply tapping into the wire like you show in "A"
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Kalkin
New User
Posts: 1
Joined: Fri Jan 10, 2020 2:05 pm

Re: Honda 2012

Post by Kalkin »

Thank you very much Zack. I'll try it asap and let you know if it worked.

:D
Last edited by Kalkin on Sat Jan 11, 2020 11:30 am, edited 1 time in total.

Post Reply

Return to “Honda”