2019 Toyota Tundra JBL - New system

Find answers to common installation issues with the WebLink Updater.
Post Reply
liddown
New User
Posts: 1
Joined: Thu Sep 26, 2019 3:22 pm

2019 Toyota Tundra JBL - New system

Post by liddown »

Hi,

Installed new DSR1 in my 2019 Tundra (JBL Headunit with Nav).. The DSR1 is performing well, two minor issues I am wondering if they are fixable...

1. Music playing, Navigation on... When Navigation speaks, music drops in level, and drivers side speakers are primarily the spoken navigation, all good. After the speaking, the DSR1 mutes all music all speakers for a second, then plays normally through all speakers. It would be nice if after navigation speaking is over, the drivers side speakers would come back to normal volume music without the other channels muting and all coming back together.

2. During navigation there is a double beep as you are approaching a turn or other action. That beep is now gone if music is not playing, however it is present but very low in volume when music is playing.

Thanks for your time!
David

User avatar
JustinFerroni
ADS Team
Posts: 565
Joined: Mon Jan 15, 2018 2:18 pm

Re: 2019 Toyota Tundra JBL - New system

Post by JustinFerroni »

liddown wrote:
Thu Jan 02, 2020 9:04 pm
Hi,

Installed new DSR1 in my 2019 Tundra (JBL Headunit with Nav).. The DSR1 is performing well, two minor issues I am wondering if they are fixable...

1. Music playing, Navigation on... When Navigation speaks, music drops in level, and drivers side speakers are primarily the spoken navigation, all good. After the speaking, the DSR1 mutes all music all speakers for a second, then plays normally through all speakers. It would be nice if after navigation speaking is over, the drivers side speakers would come back to normal volume music without the other channels muting and all coming back together. Unfortunately the way that the switching works to mix the audio this is going to be the best solution at this time. Engineering has tried multiple ways and all are worse off then how it currently functions.

2. During navigation there is a double beep as you are approaching a turn or other action. That beep is now gone if music is not playing, however it is present but very low in volume when music is playing. This one I am digging a little deeper into. When you flashed the DSR1 there is a Beep Volume , What do you have that set too? Default is 6 maybe try turning it up. Also in the radios settings do we have any prompt, chime, etc volume adjustments? Sometimes you have to turn them off and back on again to have them reset and register.

Thanks for your time!
David
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

Post Reply

Return to “Weblink Updater”