2008 Dodge Charger Required gear

Post Reply
jsaling
New User
Posts: 2
Joined: Tue Dec 31, 2019 2:47 pm

2008 Dodge Charger Required gear

Post by jsaling »

Trying to replace the factory radio in 2008 Dodge Charger with NO steering wheel controls. Radio is JVC KW-M740BT. I was provided with only the Maestro HRN-RR-CH1 kit by the car owner. I connected to harness and installed in car, but the radio does not power on.

Should the HRN-RR-CH1 harness be enough to get the radio working, or does it only work in conjunction with the RR/RR2 modules?

User avatar
JustinFerroni
ADS Team
Posts: 621
Joined: Mon Jan 15, 2018 2:18 pm

Re: 2008 Dodge Charger Required gear

Post by JustinFerroni »

Yes the CH1 harness is an accessory to the Maestro RR hardware. It cannot be used without the Maestro RR especially in a vehicle that is equipped from the OEM with a radio that is data controlled.
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

jsaling
New User
Posts: 2
Joined: Tue Dec 31, 2019 2:47 pm

Re: 2008 Dodge Charger Required gear

Post by jsaling »

Thank you

User avatar
JustinFerroni
ADS Team
Posts: 621
Joined: Mon Jan 15, 2018 2:18 pm

Re: 2008 Dodge Charger Required gear

Post by JustinFerroni »

No problem!
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

Post Reply

Return to “CH1 radio replacement solution”