Nothing works 2011 Ram

Post Reply
swoop4321
New User
Posts: 2
Joined: Tue Dec 31, 2019 9:29 am

Nothing works 2011 Ram

Post by swoop4321 »

I'm installing a Pioneer AVH-501EX in my 2011 Ram with factory Alpine system and RES head unit. After flashing the RR and wiring per the instructions, when I turn my key on, the stereo does nothing and the RR shows no light, but several of the dash warning lights come on, it tells me there's a problem with the tire pressure system, and every few seconds, my headlights flash and the wipers cycle.

User avatar
JustinFerroni
ADS Team
Posts: 550
Joined: Mon Jan 15, 2018 2:18 pm

Re: Nothing works 2011 Ram

Post by JustinFerroni »

No LED lights typically means that you are not getting any power to the Maestro. Grab your multimeter and test the DC voltage of the yellow wire on the 3 pin harness of the Maestro module.
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

swoop4321
New User
Posts: 2
Joined: Tue Dec 31, 2019 9:29 am

Re: Nothing works 2011 Ram

Post by swoop4321 »

I have voltage on the yellow wire, but not on the red wire.

User avatar
JustinFerroni
ADS Team
Posts: 550
Joined: Mon Jan 15, 2018 2:18 pm

Re: Nothing works 2011 Ram

Post by JustinFerroni »

It may be best to call in so we can get it going faster for you.
M-F 8:30am to 8:30pm EST
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

Post Reply

Return to “CH1 radio replacement solution”