2006 Honda CRV Install help

Analog Steering Wheel Interface
Post Reply
bartpic@comcast.net
New User
Posts: 1
Joined: Sun Dec 29, 2019 3:33 pm

2006 Honda CRV Install help

Post by bartpic@comcast.net »

I am installing a Maestro SW on a 2006 CRV. I can figure out which wire(s) from the steering wheel buttons to connect to the wires from Connector A on the Maestro Unit. The diagram are not clear and the wire colors don't match anything on the car. The Honda OEM Radio had two connectors, one from the radio (Blue) and one white 14 Pin connector which I believe has the wires I need. I cannot find any info on this connector anywhere.
I believe I need to connect the Black, Red wires to the corresponding Black and red wires in the harness in the car. But there is at least one more connection and the Maestro Instructions are vague. Any help?

User avatar
JustinFerroni
ADS Team
Posts: 617
Joined: Mon Jan 15, 2018 2:18 pm

Re: 2006 Honda CRV Install help

Post by JustinFerroni »

It's probably best that you call in for assistance with this.
Normal Tech Hours are M-F 8:30am to 8:30pm EST
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

Post Reply

Return to “Maestro SW”