Wireless Apple Carplay

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
C27mike
New User
Posts: 3
Joined: Wed Sep 11, 2019 9:47 am

Wireless Apple Carplay

Post by C27mike »

I have a 2018 non JBL non Nav Tacoma that I am hooking up a DDX9906XR to. The instructions say the VSS(pink wire) is not used. However through research, I have found out the pink wire must be hooked up for wireless CarPlay. Can you confirm this and if so where on my non Nav non JBL vehicle do I hook it up? Or just hook it up on the TO2 harness.

Thanks
Mike

billr
ADS Team
Posts: 673
Joined: Mon Feb 05, 2018 9:18 am

Re: Wireless Apple Carplay

Post by billr »

Mike, you will connect the VSS wire of the radio to the Maestro's Pink wire as our install guide shows:
tacoma.PNG
The radio needs this for CarPlay to work.
You do not have the required permissions to view the files attached to this post.

C27mike
New User
Posts: 3
Joined: Wed Sep 11, 2019 9:47 am

Re: Wireless Apple Carplay

Post by C27mike »

Thank you.

Mike

Post Reply

Return to “Toyota”