External Temperature

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
techjag
New User
Posts: 3
Joined: Thu Aug 22, 2019 11:16 pm

External Temperature

Post by techjag » Wed Sep 04, 2019 6:33 pm

Hey,

I noticed in some of the videos and pictures I have seen the external temperature is displayed along with the climate controls (which are not enabled since my vehicle didn't have those originally). That being said, is there anyway to display the external temperature on one of the other screens? I know it's available via a PID from the OBD II data (I can pull it with a Bluetooth ODBII reader).. any help would be appreciated.
2015 F150 4.3 System replaced by Pioneer DMH-1500NEX
FTR1, ADS-MRR

User avatar
Zack Flynn
ADS Team
Posts: 657
Joined: Mon Dec 12, 2011 9:46 am

Re: External Temperature

Post by Zack Flynn » Wed Sep 04, 2019 8:19 pm

If exterior temperature shows as a selectable gauge in the available gauges then you can assign that to one of them in the gauge screen by long pressing the gauge you would like it to be. That would be the only place we could show the exterior temp, and the only time we would be getting that data from the vehicle
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”