CH 2 OBD 2

Post Reply
Rsbausas
New User
Posts: 1
Joined: Sat Aug 24, 2019 4:11 pm

CH 2 OBD 2

Post by Rsbausas » Sat Aug 24, 2019 4:15 pm

I just bought a CH2 and in the instructions it shows a OBD 2 plug to connect to my 2005 Chrysler 300c. I do not have this in the CH2 box. Where can I get one or where do I wire the 2 wires from the CH 2 too?
Thanks.

User avatar
billr
ADS Team
Posts: 503
Joined: Mon Feb 05, 2018 9:18 am

Re: CH 2 OBD 2

Post by billr » Mon Aug 26, 2019 9:40 am

you will connect the Brown/Red and Brown/Yellow wires of the CH2 harness to pins 6 and 14 of the OBD2:
OBD2 color.png
The factory wires are normally twisted together so it makes it easier to identify.
You do not have the required permissions to view the files attached to this post.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

Post Reply

Return to “CH2 radio replacement solution”