OBDII information

Post Reply
New User
Posts: 4
Joined: Sun Aug 11, 2019 2:33 pm

OBDII information

Post by Stroh »

I'm looking at the Kenwood DMX906S HU. I'm likely ordering the Ready Harness prewired from Crutchfield to install my Maestro and CH1 harness so that it is plug and play. Does the data for gauges, TPMS, etc come from the can-bus or do you have to plug into the OBDII port under the dash?

User avatar
Zack Flynn
ADS Team
Posts: 828
Joined: Mon Dec 12, 2011 9:46 am

Re: OBDII information

Post by Zack Flynn »

Some information comes from MS CAN, behind the radio, while things like gauges and other vehicle info come form High Speed CAN at the OBD2 connector. Both are required for full functionality.
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician

Post Reply

Return to “CH1 radio replacement solution”