2006 Jeep Commander with Boss BVCP9685A

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
TwoTabs
New User
Posts: 2
Joined: Tue Aug 13, 2019 10:08 am

2006 Jeep Commander with Boss BVCP9685A

Post by TwoTabs » Tue Aug 13, 2019 10:25 am

Will the Maestro ADS MRR work with this head unit. Crutchfield says it will and is advertising the bundle to buy it that it will work, they said you have to trick it to make it work. I really only care about the SW controls. Thank you!

User avatar
Dara DeGrand
ADS Team
Posts: 6342
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2006 Jeep Commander with Boss BVCP9685A

Post by Dara DeGrand » Tue Aug 13, 2019 10:47 am

We do not list Boss as a compatible brand on our website, so we do not support it. In order to use the Maestro, we recommend using one of the compatible brands we list on our site.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

TwoTabs
New User
Posts: 2
Joined: Tue Aug 13, 2019 10:08 am

Re: 2006 Jeep Commander with Boss BVCP9685A

Post by TwoTabs » Fri Aug 16, 2019 9:25 am

I was told that you could flash the maestro to make it work? You just have to know what protocol Boss uses

User avatar
Dara DeGrand
ADS Team
Posts: 6342
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2006 Jeep Commander with Boss BVCP9685A

Post by Dara DeGrand » Fri Aug 16, 2019 9:49 am

If we knew, it would be listed on the site.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”