Maestro SW / Accord 2010 6 CD

Analog Steering Wheel Interface
Post Reply
Adammaestro
New User
Posts: 3
Joined: Sun Jul 21, 2019 12:00 pm

Maestro SW / Accord 2010 6 CD

Post by Adammaestro » Sun Jul 21, 2019 12:26 pm

Hello,

I’ve got a 2010 Honda Accord EXL w/6CD factory.

I installed a Sony XAV-AX1000 and am trying to get my steering wheel controls functioning with the SW.

I successfully flashed the firmware and that completed OK.

I used the wiring diagram to tap into 2 wires on the stereo factory harness

Maestro Purple/Red -> Pink (A-16)
Maestro Black/White -> Brown (A-05)

I then cut the wire in the factory Bluetooth harness (light blue B-02) and spliced in the Maestro SWI-2 IN (pink/red).

Lastly I plugged in the connector from the maestro to the Sony stereo.

When I turn on the vehicle, the maestro blinks once (green).

None of the buttons on the steering wheel are active and no lights show on the maestro when they are pressed.

Advice on what I can check? Thanks

User avatar
Dara DeGrand
ADS Team
Posts: 6100
Joined: Mon Dec 02, 2013 1:34 pm

Re: Maestro SW / Accord 2010 6 CD

Post by Dara DeGrand » Mon Jul 22, 2019 8:28 am

If you do not get flashes when you push buttons on the steering wheel, then your connections to the car are not correct, or they're done poorly and the maestro isn't seeing signal from the car. It might be best if you give us a call when you're in the car and we can help locate the wires.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Adammaestro
New User
Posts: 3
Joined: Sun Jul 21, 2019 12:00 pm

Re: Maestro SW / Accord 2010 6 CD

Post by Adammaestro » Mon Jul 22, 2019 10:44 am

Thanks, I will check all my connections again. I am using posi-taps on the stereo harness and I suspect they are not making good (enough) contact since the wires are so thin.

I will call if still having an issue after I re-wire this afternoon. Thanks

User avatar
Zack Flynn
ADS Team
Posts: 634
Joined: Mon Dec 12, 2011 9:46 am

Re: Maestro SW / Accord 2010 6 CD

Post by Zack Flynn » Mon Jul 22, 2019 8:04 pm

I think I spoke to you earlier on this. Did you get it resolved by redoing your connections?
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Adammaestro
New User
Posts: 3
Joined: Sun Jul 21, 2019 12:00 pm

Re: Maestro SW / Accord 2010 6 CD

Post by Adammaestro » Mon Jul 22, 2019 8:35 pm

Hey - yes I did. All good, thank you!

User avatar
Zack Flynn
ADS Team
Posts: 634
Joined: Mon Dec 12, 2011 9:46 am

Re: Maestro SW / Accord 2010 6 CD

Post by Zack Flynn » Tue Jul 23, 2019 7:23 pm

Awesome to hear.
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “Maestro SW”