CHR02 VER 1.50

Steering Wheel & Radio Replacement Combo
Post Reply
roadrunner
New User
Posts: 3
Joined: Wed Jul 10, 2019 10:42 am

CHR02 VER 1.50

Post by roadrunner » Wed Jul 10, 2019 6:43 pm

I have just received my purchase of CH2, but in the box is CH02 VER 1.50. Should I be returning it to vendor, what if any differences are there in the two harnesses. Thanks

User avatar
billr
ADS Team
Posts: 399
Joined: Mon Feb 05, 2018 9:18 am

Re: CHR02 VER 1.50

Post by billr » Wed Jul 10, 2019 6:52 pm

The Version 1.5 is the latest version of the CH2 harness so no need to return it.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

roadrunner
New User
Posts: 3
Joined: Wed Jul 10, 2019 10:42 am

Re: CHR02 VER 1.50

Post by roadrunner » Wed Jul 10, 2019 7:09 pm

Thanks, as I have been trying to educate myself on install. Kenwood DNX 6990HD 07 Dodge Magnum factory amp/ steering wheel controls.
I will let you know how it works out.

roadrunner
New User
Posts: 3
Joined: Wed Jul 10, 2019 10:42 am

Re: CHR02 VER 1.50

Post by roadrunner » Wed Jul 10, 2019 7:52 pm

One other question, I don’t see a ODB II connector in the CH2 box ?

User avatar
billr
ADS Team
Posts: 399
Joined: Mon Feb 05, 2018 9:18 am

Re: CHR02 VER 1.50

Post by billr » Wed Jul 10, 2019 8:03 pm

There should be a Brown/Red and Brown/Yellow wire twisted together in the CH2 harness. Those are the wires that need to go down to the OBD2 connector, you will just extend them. The Brown/Red wire will go to Pin #6 of the OBD2 connector and the Brown/Yellow will go to pin # 14.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

Post Reply

Return to “Maestro RR/RR2”