Cable between SW and Pioneer AVH-W4400NEX

Analog Steering Wheel Interface
Post Reply
raveeg
New User
Posts: 2
Joined: Sun Jul 07, 2019 2:58 am

Cable between SW and Pioneer AVH-W4400NEX

Post by raveeg » Sun Jul 07, 2019 3:28 am

hello -

I am installing a Pioneer AVH-W4400-NEX in a 2005 Honda CR-V.
I see on the back of the head unit, there is a miniature 4 pin connector that Pioneer designated for iDatalink Maestro. However, the iDatalink Maestro SW unit I purchased, has a 3.5mm connector at the output end of the cable for the head unit interface. How do i proceed? Thanks for any help.

User avatar
billr
ADS Team
Posts: 399
Joined: Mon Feb 05, 2018 9:18 am

Re: Cable between SW and Pioneer AVH-W4400NEX

Post by billr » Mon Jul 08, 2019 8:32 am

The 4 pin Idatalink connector is for our other interface the Maestro RR.
As for the SW, you will connect the 3.5mm jack on the blue plug of the SW to the W/R port of the Pioneer.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

raveeg
New User
Posts: 2
Joined: Sun Jul 07, 2019 2:58 am

Re: Cable between SW and Pioneer AVH-W4400NEX

Post by raveeg » Mon Jul 08, 2019 2:57 pm

Thank you - much appreciated.

Post Reply

Return to “Maestro SW”