Power Acoustik integration

Steering Wheel & Radio Replacement Combo
Post Reply
jeffhorton1965
New User
Posts: 3
Joined: Fri Jul 05, 2019 6:32 pm

Power Acoustik integration

Post by jeffhorton1965 » Fri Jul 05, 2019 6:36 pm

Will the Maestro RR work with a Power Acoustik PDN-626b? I was wondering because these radios are almost the same as the DUAL radios..

User avatar
billr
ADS Team
Posts: 538
Joined: Mon Feb 05, 2018 9:18 am

Re: Power Acoustik integration

Post by billr » Fri Jul 05, 2019 7:36 pm

since we don't technically list Power Acoustik it's hard to say if it will work. You can try flashing it as a Dual radio and try it out.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

jeffhorton1965
New User
Posts: 3
Joined: Fri Jul 05, 2019 6:32 pm

Re: Power Acoustik integration

Post by jeffhorton1965 » Fri Jul 05, 2019 10:25 pm

Heck I will try it. I can always flash it to another radio if it doesn’t work right?

User avatar
Dara DeGrand
ADS Team
Posts: 6248
Joined: Mon Dec 02, 2013 1:34 pm

Re: Power Acoustik integration

Post by Dara DeGrand » Mon Jul 08, 2019 11:21 am

Correct. You can re-flash the maestro an unlimited number of times, so you're free to try different radio brands and models to see if you can find a steering wheel protocol that works for your radio.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

jeffhorton1965
New User
Posts: 3
Joined: Fri Jul 05, 2019 6:32 pm

Re: Power Acoustik integration

Post by jeffhorton1965 » Mon Jul 15, 2019 12:40 pm

Well here is the result... IT WORKS... I flashed it as being connected to a DUAL radio, connected my Power Acoustik PDN-626B up and was able to map my steering wheel controls. I have not connected the sync wire up yet to retain my sync but will get to that later. :D :D :D :D :D :D :D :D :D :D :D

Post Reply

Return to “Maestro RR/RR2”