2009 Subaru Forester with Axxera (Dual)

Analog Steering Wheel Interface
Post Reply
jtrobaugh
New User
Posts: 1
Joined: Thu Jul 04, 2019 12:27 pm

2009 Subaru Forester with Axxera (Dual)

Post by jtrobaugh » Thu Jul 04, 2019 7:21 pm

Hello, I am trying to connect up my Maestro SW ( B996458CD9 ) with a Axxera (Dual) in a 2009 Subaru Forester without factory Navigation.

After flashing the unit the buttons are not working correctly, I have tried different combinations but still the buttons respond the same no matter what configuration I try. Most of the buttons cause the radio to mute and start seeking through all the radio stations but doesn't stop on any stations. The other buttons cause the unit to switch through the various sources ( Radio, USB, Music )

vol + = seek/mute
vol - = seek/mute
mute = mode change
mode = seek/mute
seek ^ = mode change
seek down = nothing

Any ideas or suggestions on what is happening?

Thanks,
jt

JustinFerroni
ADS Team
Posts: 413
Joined: Mon Jan 15, 2018 2:18 pm

Re: 2009 Subaru Forester with Axxera (Dual)

Post by JustinFerroni » Fri Jul 05, 2019 8:52 am

With some of the newer Axxera/Dual radios they havent sent the new protocol over to us. I have seen some success using various Jenson radios and other used Pioneer. Its just a trial and error test as to which one at this point until we get the protocol from Axxera/Dual.
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

Post Reply

Return to “Maestro SW”