2015 Tundra non-JBL with amp wiring question

Post Reply
kniwolf
New User
Posts: 3
Joined: Thu Jun 13, 2019 7:44 am

2015 Tundra non-JBL with amp wiring question

Post by kniwolf »

I've got a 2015 Tundra non-JBL that has a factory amp. I'm looking at the Maestro RR wiring guide, and it only shows a "without amplifier" option for Toyota Tundra Without JBL 2014-2018. Should I follow these instructions (which essentially tells me to wire in the speaker wires from the T02 directly to the head unit harness), or should I be following the wiring diagram for an amplifier that is listed under the Tundra with JBL instructions (where I just use the RCA connections to connect the T02 to the head unit's RCA out)?

Thanks in advance for any assistance!

billr
ADS Team
Posts: 673
Joined: Mon Feb 05, 2018 9:18 am

Re: 2015 Tundra non-JBL with amp wiring question

Post by billr »

If your truck doesn't have an amplifier then follow the instruction sheet that's for "without amplifier".

kniwolf
New User
Posts: 3
Joined: Thu Jun 13, 2019 7:44 am

Re: 2015 Tundra non-JBL with amp wiring question

Post by kniwolf »

Hey Bill,

Thanks for the quick reply. That's the catch - it has a factory amplifier, however it does not have the JBL package.

User avatar
Dara DeGrand
ADS Team
Posts: 6755
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2015 Tundra non-JBL with amp wiring question

Post by Dara DeGrand »

Still, follow the instructions for 'without amplifier'. If you wire it up like it's got JBL, the sound will be whisper quiet.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

kniwolf
New User
Posts: 3
Joined: Thu Jun 13, 2019 7:44 am

Re: 2015 Tundra non-JBL with amp wiring question

Post by kniwolf »

Will do, thanks!

Post Reply

Return to “TO2 radio replacement solution”