Camaro dash kit

Group using the GM3 and GM5 firmware for Onstar bluetooth, sat radio, Door chime, turn signal retention and steering wheel control, custom gauges, vehicle info, park assist... * see specific firmware for full feature list.
Post Reply
Tlinsenmeyer
New User
Posts: 2
Joined: Sun Jun 09, 2019 8:53 pm

Camaro dash kit

Post by Tlinsenmeyer » Sun Jun 09, 2019 8:57 pm

I have just finished the install on my 2013. Everything works except the factory backup camera. I used the supplies harness and plugged it into the back camera port on a Kenwood DDX9905s. Any suggestions.

User avatar
Dara DeGrand
ADS Team
Posts: 6076
Joined: Mon Dec 02, 2013 1:34 pm

Re: Camaro dash kit

Post by Dara DeGrand » Mon Jun 10, 2019 9:30 am

Does the screen switch to the camera when you put the vehicle in reverse?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Marty Z
New User
Posts: 27
Joined: Thu May 30, 2019 3:23 pm

Re: Camaro dash kit

Post by Marty Z » Mon Jun 10, 2019 11:51 am

Did you check the DDX9905S settings? I just installed the DDX9705S and the camera in the HU is set to "OFF" by default. You have to switch it to "ON" as part of the initial setup.

Tlinsenmeyer
New User
Posts: 2
Joined: Sun Jun 09, 2019 8:53 pm

Re: Camaro dash kit

Post by Tlinsenmeyer » Tue Jun 11, 2019 1:37 pm

It was all my mistake. The camera switch's when put in reverse, but the car needs to be running before it works. Now the only problem that I have is the picture is noisy.

Post Reply

Return to “Chevrolet, GMC, Buick, Cadillac, Pontiac, Saturn, Hummer”