Hyundai Veracruz 2012 Limited instructions were off

Analog Steering Wheel Interface
Post Reply
New User
Posts: 1
Joined: Sun Jun 09, 2019 7:12 pm

Hyundai Veracruz 2012 Limited instructions were off

Post by Dominicus » Sun Jun 09, 2019 7:52 pm

The instructions downloaded at the time of this post for Maestro SW connected to Hyundai Veracruz 2012 Limited with Infinity audio without navigation directed me to a 6-pin "Connector A":


There was no such 6-pin connector that plugged to the radio.

Instead, there was a larger 20-pin connector. You can find the intended wires to be tapped in the middle section of this connector, guided by the stated colours and highlighted position below:

ADS Team
Posts: 428
Joined: Mon Jan 15, 2018 2:18 pm

Re: Hyundai Veracruz 2012 Limited instructions were off

Post by JustinFerroni » Mon Jun 10, 2019 2:33 pm

If you look at the connector you will see that it is comprised of 3 separate connectors snapped together C1, C2, C3. So while yes the total pin count is 20 pins it is in reality 3 separate connectors. The connector needed is the 6 pin connector M80-C2 with pins 5 and 6 having the populated wires needed for our piece to be interfaced with. Glad you got it squared away!

Best Regards
You do not have the required permissions to view the files attached to this post.
Justin Ferroni
Technical Support Specialist- Maestro
T: 514.807.2888
TF: 866.427.2999

Post Reply

Return to “Maestro SW”