X110-SRA OBDII head unit wire install.

Post Reply
sbfd337
New User
Posts: 3
Joined: Wed Jun 05, 2019 1:38 am

X110-SRA OBDII head unit wire install.

Post by sbfd337 »

I purchased a used unit. The OBDII connector was removed and the 2 wires were installed directly to prior OBDII wiring. Which wires on my 2015 GMC Sierra should I tap into to install these 2 wires from the wiring harness to my OBDII wires? What wires and color should I be looking for?

User avatar
JustinFerroni
ADS Team
Posts: 588
Joined: Mon Jan 15, 2018 2:18 pm

Re: X110-SRA OBDII head unit wire install.

Post by JustinFerroni »

the red/brown wire is going to go to pin6 and the yellow/brown will got to pin14 of the obd2 connector
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

sbfd337
New User
Posts: 3
Joined: Wed Jun 05, 2019 1:38 am

Re: X110-SRA OBDII head unit wire install.

Post by sbfd337 »

That is what I thought. I have the wires connected to Pin 6 and 14. The head unit still says OBD disconnected.

User avatar
JustinFerroni
ADS Team
Posts: 588
Joined: Mon Jan 15, 2018 2:18 pm

Re: X110-SRA OBDII head unit wire install.

Post by JustinFerroni »

try resetting the maestro in the maestro menus
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

sbfd337
New User
Posts: 3
Joined: Wed Jun 05, 2019 1:38 am

Re: X110-SRA OBDII head unit wire install.

Post by sbfd337 »

That was the trick. Also was able to reattach my electric side steps that plug into the OBD2. Everything works perfectly. Thanks.

User avatar
JustinFerroni
ADS Team
Posts: 588
Joined: Mon Jan 15, 2018 2:18 pm

Re: X110-SRA OBDII head unit wire install.

Post by JustinFerroni »

Awesome, glad you got it going!
Justin Ferroni
Technical Support Specialist
ADS Maestro
T 514.807.2888
Justin.Ferroni@adsdata.ca

Post Reply

Return to “GM2 radio replacement solution”