wrangler no sound to the rear speakers

Group using the CH1, CH2 and CH3 firmwares for uConnect, steering wheel controls, OEM amplifier retention. compatible with select Mitsubishi and Volkswagen vehicles * see specific firmware for full feature list.
Post Reply
New User
Posts: 9
Joined: Fri May 17, 2019 3:41 pm

wrangler no sound to the rear speakers

Post by yycwrangler » Wed May 29, 2019 12:58 pm

All is working well..Have harness and maestro rr. I went into the fade settings yesterday and noticed that sound to the rear speakers is virtually non existence..Even when I move the fader all the way to the rear on my Panasonic dmh c2500nex.

Wired the stereo wires directly to the maestro wiring. Does have the Alpine subwoofer and I believe amp.



User avatar
Dara DeGrand
ADS Team
Posts: 6136
Joined: Mon Dec 02, 2013 1:34 pm

Re: wrangler no sound to the rear speakers

Post by Dara DeGrand » Wed May 29, 2019 3:23 pm

With non-iDatalink radios, Pioneer included, the digital fader is not retained. If you fade all the way to the rear you will have no sound. If you center it or set it all the way to the front, you should have sound in all 4 speakers.

If you wish to retain the digital fader, you must use one of the radios listed here:
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Dodge, Chrysler, Jeep”