2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
DaneDad
New User
Posts: 4
Joined: Tue May 28, 2019 3:06 am

2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Post by DaneDad » Tue May 28, 2019 3:30 am

Advice needed. Installed the above configuration with the F01 harness as directed. My steering wheel is not shown. Steering wheel from the 07 MKX or Fusion with nav are both accurate. Steering wheel controls work fine if I choose an older Pioneer radio with either the MKX or the Fusion settings. Can program any available functions and it works. Nothing at all works if I choose the correct head unit, DMH-1500NEX. Serial number is correct as displayed in settings. All wiring and connectors and in correct location per diagram. I bought this combination specifically to see OBD-II information on head unit as described in literature form both you an Pioneer. Head unit is on Firmware 8.06 and RR has been Flashed with every firmware from 2.4 to 3.6 to no avail.

User avatar
billr
ADS Team
Posts: 507
Joined: Mon Feb 05, 2018 9:18 am

Re: 2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Post by billr » Tue May 28, 2019 9:34 am

when you had it flashed as the correct vehicle with the Pioneer DMH-1500NEX, do you remember the RR flashing at you? That radio is a data radio which requires the data cable to be connected (data cable has a 4 pin black connector on both ends and comes in the box the RR came in).
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

DaneDad
New User
Posts: 4
Joined: Tue May 28, 2019 3:06 am

Re: 2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Post by DaneDad » Tue May 28, 2019 1:13 pm

It flashes and data cable is connected.

DaneDad
New User
Posts: 4
Joined: Tue May 28, 2019 3:06 am

Re: 2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Post by DaneDad » Tue May 28, 2019 1:18 pm

Going to pull it all out after work this evening and triple check everything

DaneDad
New User
Posts: 4
Joined: Tue May 28, 2019 3:06 am

Re: 2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Post by DaneDad » Tue May 28, 2019 3:02 pm

well it appears the data cable or a connector is bad. Borrowed a cable from my other car and it works fine using either the Fusion or MKX flash. Now to get another cable...

User avatar
Dara DeGrand
ADS Team
Posts: 6136
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2007 Edge with Factory Navigation and Pioneer DMH-1500NEX

Post by Dara DeGrand » Wed May 29, 2019 10:54 am

Your replacement cable is in the mail. Should be there in 2 days. See your email for a tracking number.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”